Product Description
The EclSoft Tube100 is a multipurpose, IP65 wireless linear pixel tube designed for Film & TV, indoor and outdoor environments. The EclSoft Tube100 has a 48W RGB + Warm White LED source with 16 independently-controlled sections. Similar the other fixtures in the soft light range, it has an RGBW mode, RGB, CMY, HSI, XY, RAW Direct, CCT Linear and CCT Presets with +/- green shift, source emulation and industry-standard colour gels. This fixture has high-quality tunable white with ultra-high CRI, as well as on-board cinema effects and pixel effects. This fixture is also “Spektra™ Calibrated”, sharing the same colour calibration standard as some other luminaires. The EclSoft Tube100 can be used wirelessly with its on-board battery and Wireless DMX control (CRMX + W-DMX). There is also a wired connection for mains power and an ethernet port for Art-Net or s/ACN.
The EclSoft Tube100 is a multipurpose, IP65 wireless linear pixel tube designed for Film & TV, indoor and outdoor environments. The EclSoft Tube100 has a 48W RGB + Warm White LED source with 16 independently-controlled sections. Similar the other fixtures in the soft light range, it has an RGBW mode, RGB, CMY, HSI, XY, RAW Direct, CCT Linear and CCT Presets with +/- green shift, source emulation and industry-standard colour gels. This fixture has high-quality tunable white with ultra-high CRI, as well as on-board cinema effects and pixel effects. This fixture is also “Spektra™ Calibrated”, sharing the same colour calibration standard as some other luminaires. The EclSoft Tube100 can be used wirelessly with its on-board battery and Wireless DMX control (CRMX + W-DMX). There is also a wired connection for mains power and an ethernet port for Art-Net or s/ACN.
Features:Hybrid fixture, Wireless DMX (CRMX+W-DMX) / ethernet control, battery/mains power
Pixel control, on-board cinema pixel engine, RGB + Warm White LED source with high CRI (up to 93) and TLCI
IP65 for outdoor applications
- Source:48WRGB + Warm White LEDs
- Luminous flux:2'386@Full
- Lux:71lx@3 m
- Lux:161lx@2 m
- CRI:93
- R9:92
- TLCI:91
- TM30 Rf:91
- TM30 Rg:105
- Source life expectancy:> 50.000 h
- Beam angle:128°
- Field angle:199°
- Lens type:frosted acrylic tube
- Colour control:XY, CCT, RGBW, Gel, HSI, Source Emulation, Colour Macros, CTO on colours
- Colour mixing:RGB + Warm White
- CCT:CCT control, + / - green correction, tungsten emulation
- White presets:2.800 K - 10.000Kwith 28 K resolution
- Colour wheel:virtual colour wheel with macros
- Macros:several pre-built pixel macros with adjustable speed
- Control Resolution:16-bit dimmer and color control
- Pixel patterns:pre-programmed pixel macros and cinema lighting effects
- FX generator:16 sections withadjustable foreground/background colour, index, speed, direction
- Static mode:selection of static colour
- Manual mode:manual adjustment of colour
- Auto mode:built-in programs with execution speed adjustment
- Special features:linear crossfade channel from any white to any colour; virtual CTO on colours
- Supported Protocols:Art-Net, sACN, CRMX+W-DMX, Kling-Net
- DMX channels:main personality 1 / 2 / 13 / 14 / 18 / 19 / 20 / 23 / 33 / 43ch
- RDM:for remote addressing and parameter configuration
- Display:Graphic User Interface
- IR:infrared sensor controlled by remote (included in the pack, not included in single unit)
- Master/Slave:for synchronised operation of more units linked in a chain
- Dimmer:linear 0 - 100% electronic dimmer
- Dimmer curves:4selectable dimming modes available
- Strobe / shutter:1 - 30Hz, electronic
- Selectable PWM:3000 to 24000 Hz (selectable steps)
- Firmware upgrade:via DMX with UPBOX1+EST100UPBOXI (not included)
- Battery:24Vlithium
- Estimated battery life:up to 3 / 6 / 8 / 12 / 16 / 18 h (selectable)
- Recharge connection:DC with jack and AC with standard powercon connector
- Recharge time:5h (max)
- Battery level indicator:shown on display
- Other:Battery recharge in AC and DC, operation in main power with possibility to disable battery recharge throught software and charging operation in flightcase through external charger
- Power connection:DC connector for battery recharge and Seetronic powerCON TRUE IP65 IN
- Wireless Connection:integrated LumenRadio TiMo FX RDM - CRMX and W-DMX compatible
- Data connection:Seetronic RJ45 IP65 IN
- Mains power supply:100-240V - 50/60Hz
- Low Voltage DC mains:24V
- Max power consumption (230V):34W
- Power factor:>0,96
- IP rating:IP65 for temporary outdoor use
- Cooling:fan-free with natural convection
- Housing:Sturdy polycarbonate body with die-cast aluminium parts
- Finish:black
- Operating temperature:Ta0 to +45 °C (+32 to +113 °F)
- Dimensions (WxHxD):1163x50x50mm
- Weight:2,4kg
- Suspension and fixing:M5 threaded insert for eye bolt, floor stand and clamp for wall installation
- Compliance:CE, RCM, FCC